Anekam Units

Electrical

Electric Field & Dielectric Strength converter

Electric field strength is voltage per unit distance.

1 volt per meter = 0.00001 kilovolts per centimeter

1 kilovolt per centimeter = 100,000 volts per meter

Formula kV/cm = V/m ÷ 100,000

Display options

Tip: you can type sums and fractions, such as 3/8, 1 1/2 or 2*(450+75).

1 volt per meter in every electric field & dielectric strength unit

UnitSymbolValue
Volt per meterV/m1
Kilovolt per meterkV/m0.001
Volt per millimeterV/mm0.001
Kilovolt per millimeterkV/mm0.000001
Volt per centimeterV/cm0.01
Kilovolt per centimeterkV/cm0.00001
Volt per milV/mil0.0000254
Volt per inchV/in0.0254

About electric field & dielectric strength

Electric field strength is voltage per unit distance. Dielectric strength — the field at which insulation breaks down — is quoted in kV/mm or V/mil. Dry air breaks down at about 3 kV/mm.

Base unit here
Volt per meter (V/m)
Dimension
M L T⁻³ I⁻¹
Units covered
8

Where it is used

  • Insulation and cable design
  • Dielectric strength of materials
  • EMC and field exposure

Electric Field & Dielectric Strength units reference

Each unit expressed in the volt per meter (V/m), the base unit used by this converter.

UnitSymbolSystem1 unit equals
Volt per meterV/mSIbase unit
Kilovolt per meterkV/mSI1,000 V/m
Volt per millimeterV/mmSI1,000 V/m
Kilovolt per millimeterkV/mmSI1,000,000 V/m
Volt per centimeterV/cmMetric100 V/m
Kilovolt per centimeterkV/cmMetric100,000 V/m
Volt per milUS unit for dielectric strength of films and coatings.V/milImperial/US39,370.07874 V/m
Volt per inchV/inImperial/US39.37007874 V/m

Electric Field & Dielectric Strength conversion pages

From volts per meter
to kV/mm to kV/cm to V/mil
From kilovolts per millimeter
to V/m to kV/cm to V/mil
From kilovolts per centimeter
to V/m to kV/mm to V/mil
From volts per mil
to V/m to kV/mm to kV/cm