Anekam Units

Fluids & Flow

Dynamic Viscosity converter

Dynamic (absolute) viscosity measures a fluid’s resistance to shear.

1 centipoise = 0.001 pascal-seconds

1 pascal-second = 1,000 centipoises

Formula Pa·s = cP ÷ 1,000

Display options

Tip: you can type sums and fractions, such as 3/8, 1 1/2 or 2*(450+75).

1 centipoise in every dynamic viscosity unit

UnitSymbolValue
Pascal-secondPa·s0.001
Millipascal-secondmPa·s1
PoiseP0.01
CentipoisecP1
Pound-force second per square footlbf·s/ft²0.00002088543423
Reynreyn1.450377377 × 10⁻⁷
Pound per foot-secondlb/(ft·s)0.0006719689751
Kilogram-force second per square meterkgf·s/m²0.0001019716213

About dynamic viscosity

Dynamic (absolute) viscosity measures a fluid’s resistance to shear. The SI unit is the pascal-second; the centipoise (cP), equal to mPa·s, is the everyday unit — water at 20 °C is about 1 cP. Dividing dynamic viscosity by density gives kinematic viscosity.

Base unit here
Pascal-second (Pa·s)
Dimension
M L⁻¹ T⁻¹
Units covered
8

Where it is used

  • Pump and pipe pressure-drop calculations
  • Lubricants and oils
  • Paints, resins and food processing
  • Reynolds number

Dynamic Viscosity units reference

Each unit expressed in the pascal-second (Pa·s), the base unit used by this converter.

UnitSymbolSystem1 unit equals
Pascal-secondPa·sSIbase unit
Millipascal-secondmPa·sSI0.001 Pa·s
PoiseCGS unit: 1 g/(cm·s).PCGS0.1 Pa·s
CentipoiseIdentical to mPa·s. Water ≈ 1 cP at 20 °C.cPCGS0.001 Pa·s
Pound-force second per square footlbf·s/ft²Imperial/US47.88025898 Pa·s
Reyn1 lbf·s/in². Used in bearing lubrication.reynImperial/US6,894.757293 Pa·s
Pound per foot-secondlb/(ft·s)Imperial/US1.488163944 Pa·s
Kilogram-force second per square meterkgf·s/m²Gravitational9.80665 Pa·s

Dynamic Viscosity conversion pages

From pascal-seconds
to mPa·s to P to cP
From millipascal-seconds
to Pa·s to P to cP
From centipoises
to Pa·s to mPa·s to P