Surface Tension converter
Surface tension is the force per unit length along a liquid surface.
1 newton per meter = 1,000 dynes per centimeter
1 dyne per centimeter = 0.001 newtons per meter
Formula dyn/cm = N/m × 1,000
Display options
Tip: you can type sums and fractions, such as 3/8, 1 1/2 or 2*(450+75).
1 newton per meter in every surface tension unit
| Unit | Symbol | Value |
|---|---|---|
| Newton per meter | N/m | 1 |
| Millinewton per meter | mN/m | 1,000 |
| Dyne per centimeter | dyn/cm | 1,000 |
| Pound-force per inch | lbf/in | 0.005710147155 |
| Pound-force per foot | lbf/ft | 0.06852176586 |
About surface tension
Surface tension is the force per unit length along a liquid surface. Water at 20 °C is about 72.8 mN/m (72.8 dyn/cm).
- Base unit here
- Newton per meter (N/m)
- Dimension
- M T⁻²
- Units covered
- 5
Where it is used
- Coatings, wetting and adhesion
- Detergents and inks
- Capillary rise calculations
Surface Tension units reference
Each unit expressed in the newton per meter (N/m), the base unit used by this converter.
| Unit | Symbol | System | 1 unit equals |
|---|---|---|---|
| Newton per meter | N/m | SI | base unit |
| Millinewton per meter | mN/m | SI | 0.001 N/m |
| Dyne per centimeterIdentical to mN/m. | dyn/cm | CGS | 0.001 N/m |
| Pound-force per inch | lbf/in | Imperial/US | 175.1268352 N/m |
| Pound-force per foot | lbf/ft | Imperial/US | 14.59390294 N/m |